Single Phase Power Inverter Pure sine wave Inverter from China manufacturer

Single Phase Power Inverter Pure sine wave Inverter

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: INV600W-1000W

INV series Single Phase Power Inverter 6

INV series Single Phase Power Inverter 600w / 1000w with Pure Sine Wave

The INV Series Inverter is is devised to work in regions or countries of continuous ac power problems, and is also a truly revolutionary ups. This series are a kind of industrial applications that the typical Inverter will not be satisfied and using a generator is not practical. The units output pure sine wave , surge suppression, AC voltage regulation. The external batteries can be quickly recharged by a powerful battery. Load levels, battery levels and status of operation of the unit can be visioned on the LED display. This design is the best choice for telecom, security and industrial pc applications.
Inverter output is pure sinewave with a max. distortion of < 3% of THD. This feature prevents component degregations that are commonly used by other manufacturers,.
The unit turns itself off after ten seconds to conserve battery power when no power needs are detected. The normal level for this feature is set from the factory to less than 10% of total power, However, this can be deactivated via a dip switch

Applications:

Pure sine-wave output,can be used with different domestic appliance such as fan,TV,computer,refrigerator,fan,air conditioner induction cooker,micro-wave oven etc.

Specifications:

MODEL INV SERIES			600W			1000W
INPUT	Phase	Single
	Voltage	115VAC or 220/230/240VAC
	Voltage Range	-35% ~ +25% for selected nominal voltage
	Frequency	50Hz / 60Hz (Auto Sensing)
	Frequency Range	47Hz ~ 65Hz
OUTPUT	Phase	Single
	Voltage(Btt. Mode)	115VAC or 230 VAC
	Voltage Regulation(Batt. Mode)	±3% of selected output voltage
	Frequency	Auto Select for 50/60Hz 47Hz ~ 55Hz for 50Hz nominal; 56Hz ~ 65Hz for 60Hz nominal
	Frequency Regulation (Batt. Mode)	+/-1 Hz
	Output Waveform	Pure Sine wave
BATTERY	Battery Type	Sealed ,maintenance-free lead acid
	Voltage	12v		12v/24v
	Back up Time	Depend on the battery
	Charging current	12AMP
	Charging method	Smart pulse charging with two charging modes: Quick charging when battery is not fully charged, trickle charging when battery is 90% fully charged.
TRANSFER TIME	Typical	4-6ms
Display	Led Indicator	manage backup time, balance power loads and prevent UPS overloads.
Alarm	Normal city power	Green
	Battery mode	Red
	Overload	Continuous beep
PROTECTION	Full Protection	Discharge, overcharge, and overload protection
PHYSICAL	Dimension, DXWXH (mm)	460230335mm
	Net Weight (kgs)	11.5			14.0
ENVIRONMENT	Operating Environment	0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing)
	Noise Level	AC Mode: Less than 40dB Backup Mode: Less than 45dB

Competitive Advantage:

* Smart rack tower design
* Pure sine-wave output,can be used for different domestic appliance
* Microprocessor based design that Superior performance from CPU control technology
* AVR for voltage stabilization
* Inner-equipped protection for over-load,short-circuit,over-voltage, low-voltage overheating etc
* Heat-Sink built in internal and come with Auto temperature control fan for heat dissipation
* Easy to check with inverter status with LED indication
* Generator compatibly and external battery connection achievable
* Built-in 8-15Ah charger support fast battery recharging
* Intelligent battery management with protection against over-charged and over-discharged etc.<