Shenzhen Mustups Power Company Limited
|
Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
NY series Single Phase Pure Sine Wave Power Inverters 500w 600w 800w 1000w for Home
This high efficiency microprocessor controlled DC-AC inverter converts 12 Volts DC (Nominal) to 1000 Watts of pure sine-wave AC power at 100/120/220/230 Volts, 50/60 Hz.
The unit comes with in-built 15 Amp transfer switch and a 30 Amp circuit breaker. Input battery cable lugs are provided and the AC output is obtained through hardwire connection.
Features include overload, short circuit, over-temperature, under & over voltage protections, and selectable. emergency home backup. Safe to use and features over-current, over- temperature and surge protection.
Simply connect the inverter to a battery and plug your AC devices into it, then you’ve got portable power.
*Smart rack tower design
*Dc 12v to Ac 220v/230v/240v
*Rated power 500w/600w/800w/1000w
*Frequency 50-60HZ
*Pure sine-wave output,can be used for different domestic appliance
*Microprocessor based design that Superior performance from CPU control technology
* AVR design can support stable voltage output
*Inner-equipped protection for over-load, shout-circuit, over-voltage, low- voltage and over-heating
*Heat-Sink built in internal and come with Auto temperature control fan for heat dissipation
* Easy to check with inverter status with LED indication that can be upgraded to LCD
* Generator compatibly and external battery connection achievable
* Built-in 8-20Ah charger support fast battery recharging
*Intelligent battery management with protection against over-charged and over-discharged etc.
*Reverse polarity protection/by fuse/diodes
Applications:
Pure sine wave output can be used with different domestic appliance
TV, refrigerator, fan, air conditioner induction cooker, micro-wave oven etc.
Specifications:
MODEL |
NY SERIES |
500W |
600W |
800W |
1000W |
INPUT |
Phase |
Single |
|||
Voltage |
115VAC or 220/230/240VAC |
||||
Voltage Range |
-35% ~ +25% for selected nominal voltage. |
||||
Frequency |
50Hz / 60Hz (Auto Sensing) |
||||
Frequency Range |
47Hz ~ 55Hz for 50Hz nominal; |
||||
OUTPUT |
Phase |
Single |
|||
Voltage(Btt. Mode) |
115VAC or 230 VAC |
||||
Voltage Regulation(Batt. Mode) |
±3% |
||||
Frequency |
50Hz or 60Hz |
||||
Frequency Regulation (Batt. Mode) |
+/-1 Hz |
||||
Output Waveform |
Pure sine wave |
||||
BATTERY |
Battery Type |
Sealed ,maintenance-free lead acid |
|||
Back up Time |
Depends on the external battery |
||||
Dc voltage |
Dc 12v |
||||
Charging current |
10A |
||||
TRANSFER TIME |
Typical |
4-6ms |
|||
INDICATOR |
Led indicator lights |
Normal (Green), Warning (Yellow), Fault (Red) |
|||
LCD Indicator with Blue /yellow Back Light |
UPS status, I/P&O/P Voltage Frequency, |
||||
AUDIBLE ALARM |
Battery Mode |
Beeping every 4 seconds |
|||
Low Battery |
Sounding every second |
||||
Overload |
Sounding every 0.5 second |
||||
Fault |
Continuous sounding |
||||
PROTECTION |
Full Protection |
Discharge, overcharge, and overload protection |
|||
PHYSICAL |
Dimension, DXWXH (mm) |
375* 130*190 mm |
|||
Net Weight (kgs) |
7.2 |
9.1 |
10.5 |
13.5 |
|
ENVIRONMENT |
Operating Environment |
0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing) |
|||
Noise Level |
AC Mode: Less than 40dB |